|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Standard bucket capacity |
1.7m³ |
Overall length(bucket keep flat on the ground) |
6770 mm |
Rated load weight |
30kN |
overall width(outside of wheel) |
2310 mm |
Raising time (full load) |
≤6.3s |
overall height |
3280 mm |
The sum of three items |
≤11.4s |
the width of the bucket |
2510 mm |
Max. breakout force |
≥115kN |
wheel base |
2850mm |
Max.traction force |
≥90 kN |
wheel track |
1800 mm |
Max.climbing gradient |
30º |
Min.ground clearance |
420 mm |
Min. turning radius(out side of rear wheel) |
6195mm |
Max.dumping height |
2850 mm |
Min.turning radius (outside of bucket) |
6630mm |
Dumping reach(the max.dumping height) |
1040mm |
Forward gear Ⅰspeed |
0～7km/h |
Operating weight |
10500kg |
Forward gear Ⅱspeed |
0～12km/h |
Fuel capacity |
140L |
Forward gear Ⅲ speed |
0～27km/h |
Hydraulic oil capacity |
130L |
Forward gear Ⅳ speed |
0～35km/h |
Engine oil capacity |
16L |
Reverse gear Ⅰspeed |
0～7km/h |
Transmission oil capacity |
28L |
Reverse gear Ⅱspeed |
0～12km/h |
Axle oil capacity |
32L |
Reverse gear Ⅲ speed |
0～27km/h |
Brake hydraulic oil capacity |
4L |
CL952 WHEEL LOADER
CL952 MAIN TECHNICAL SPECIFICATIONS
| Bucket capacity | 3.0m³ |
| Rated load | 50kN |
| Raising time | 6.2s |
| The sum of three items | 11s |
| Max. breakout force | 165 kN |
| Max. drawing force | 145kN |
| Max. climbing gradient | 30° |
| Min. turn radius | mm |
| Outside of rear tyre | 6250 |
| Outside of bucket | 6890 |
| Traveling speed | km/h |
| 1st | 0～12 |
| 2st | 0～36 |
| Reverse | 0～16 |
| Dimension | mm |
| Overall length | 7500 |
| Overall width | 2900 |
| Overall height | 3300 |
| bucket width | 2970 |
| wheel base | 2840 |
| wheel track | 2260 |
| Min. ground clearance | 540 |
| Max. dumping height | 3200 |
| Dumping reach | 1350 |
| Operating weight | 16300kg |
| Oil tank capacity | |
| Fuel oil | 260L |
| Hy. Oil tank | 280L |
| Engine oil | 20L |
| Gear-box | 45L |
| Axle and final reducer (single axle) | 25L |
| Brake system | 4L |
| Engine | |
| Model | WD61567G3-28A |
| Rated power | 162kW |
| rated speed | 2200r/min |
| brake system | |
| Brake pressure | 0.45～0.68Mpa |
| Foot brake type | Air assisted oil disc type four wheel brake |
| Hand brake type | Soft shaft control inner expand hoof brake |
| Transmission system | |
| Type | Planetary power shift |
| Torque confficient | 4 |
| Torque convertor intake oil pressure | 0.3～0.45Mpa |
| Torque convertor outlet oil pressure | 0.2～0.3Mpa |
| Transmission control pressure | 1.1～1.4Mpa |
| steering system | |
| Type | Full hydraulic articulated frame steering |
| Working system pressure | 14Mpa |
| Steering angle | Left right 35° |
| Axle and main transmission | |
| Main transmission type | single stage |
| Main transmission reducer ratio | 5.286 |
| final reducer | Single stage planetary |
| Working system pressure | |
| System type | open model twin-pump controlling |
| Working system pressure | 16Mpa |
| Bucket delivery time | 0.9s |
| tires | |
| Standard configuration size of tyre | 23.5.2025 |
| Front tyre pressure | 0.333-0.353 Mpa |
| Rear tyre pressure | 0.275-0294 Mpa |
CL955 Wheel Loader
Engine
Weichai Steyr turbo-charged diesel engine,
high power and torque, low consumption
and noise, high reliability;
Double-stage air filter is optional for dusty
fields.
Improved fan radiator are provided,
applicable to coastal, high temperature and
high humidity.
Shangchai(shanghai diesel) C6121 diesel
engine licensed manufacture of CAT3306 is
optional.
Air filter is in horizontal design for
convenient maintenance.
Hydraulic system
The loading-sensing hydraulic steering
system is smooth in operation, stable and reliable in performance;
Super high pressure work pump is adopted in work equipment hydraulic system which leads to quick lifting speed
and high efficiency.
The fluid joints are reliable in sealing because all of them are well-known brand in China. The pipe lines have long
durability.
Transmission and torque converter
Twin-turbine torque converter can make a full use of engine power and enlarge torque to make a lager traction
force;
With a planet transmission, it is compact, higher transmission efficiency and speed with long gear service life.
Cab
With new steel frame, the cab features wider view field, reliable safety and low noise;
Spacious cab is provide with instruments and control devices in reasonable arrangement for convenient operation.
Noise-absorbing, thermal insulation and high class decoration;
The low vibrating suspending seat is design specially for the operators that improve the human feeling.
The air conditioner is optional.
Axle
5-ton strengthened driving axles are high in load-bearing capacity and reliability because of the excellent
performance and mature technology.
It is good in stability because of a fair loading distribution between front and rear axles.
Wide tread and low pressure construction equipment tyres are high in adhesive and low pressure ratio to ground.
Strong cross-country and climbing capacity assure the machine of operating well in rough terrain.
Engine hood
The big folding engine side covers made in steel are of good appearance and suitable for maintenance.
Brake system
Air over oil hydraulic four wheel disc brake assures calm brake and high reliability.
CL955 MAIN TECHNICAL SPECIFICATIONS
| Bucket capacity | 3.0m³ |
| Rated load | 50kN |
| Raising time | ≤5.7s |
| The sum of three items | ≤10.2s |
| Max. breakout force | ≥165kN±5kN |
| Max. drawing force | ≥145kN±5kN |
| Max. climbing gradient | 28° |
| Traveling speed | km/h |
| Gear shift | 2 forward 1 reverse |
| Highest speed | 38km/h |
| Dimension | mm |
| Overall length | 7717 |
| Overall width | 2785 |
| Overall height | 3378 |
| bucket width | 3030 |
| wheel base | 2920 |
| wheel track | 2190 |
| Min. ground clearance | 534 |
| Max. dumping height | 3050 |
| Dumping reach | 1148mm |
| Operating weight | 16500kg |
| Oil tank capacity | |
| Fuel oil | 270L |
| Hy. Oil tank | 270L |
| Engine oil | 20L |
| Gear-box | 45L |
| Axle | 25L |
| brake system | 4L |
| Engine | Weichai steyr |
| Model | WD61567G3-36 |
| Ratedpower | 162kW |
| ratedspeed | 2200r/min |
| Brakesystem | |
| Brakepressure | 0.45～0.68Mpa |
| Footbraketype | Air assisted oil disc type four wheel brake |
| Handbraketype | Manualparking brake |
| Transmission system | |
| torque converter | single phase, 4 elements, twin-turbine hydraulic torque converter. |
| Torquecoefficient | 4.19 |
| transimission | Planetary powershift |
| steering system | |
| Type | articulated load-sensing hydraulic steering system |
| Steering angle | 35°each side |
| Min.turn radius | mm |
| Outside of rear tyre | 6178 |
| Outside of bucket | 6888 |
| Axle and main transmission | |
| Main transmission type | single stage |
| final reducer | Single stage planetary |
| Working system pressure | |
| Working system pressure | 18Mpa |
| tyre | |
| Standard configuration size of tyre | 23.5-25 |
| Fron tyre pressure | 0.33-0.35Mpa |
| Rear tyre pressure | 0.27-029Mpa |
CL956 Series Wheel Loader
Main Features:
CL956 Series Wheel Loader is Single Rocker Tyre wheel loader.
The machines have giant dominance in performance in breakout
force, traction force, load capacity, the sum of three items etc with
the optimized design of whole machine, lengthening the wheel
base, increasing the mass, equipping the advanced engine system﹠
transmission system﹠hydraulic system as well as brake system.
And this absolutely solves the defects of rear raising, no force, tired
operation, unstable brake, frame broken, rocker intervening frame,
which are new ﹠good sale products.
Collocation Features
Power System:
Adopting advanced performance engine, the machine has many
advantages such as Easy to Start, Low Fuel Consumption, Strong
Power, Low Noisy, Electromagnetic Flameout. Adopting the
reliable power shift transmission box, the machine has high
efficiency and big transmission torque.
Steering System:
Adopting completely hydraulic flow-enlarge system, it’s easy to control and stable to steer. Interfowing with the hydraulic system of working equipment, the machine ensure the reliable steering at low speed and reduce the power loss.
Brake System:
Adopting disc-type air/hydraulic brake, the structure is simple and easy-control with reliable performance.
Main Structural Parts:
The front ﹠rear articulated frames is with counter-balance lay-out
which realize the best design of different act of the working
equipment. The main structural parts adopts high-strength
low-carbon alloy steel which is with reasonable structure and high
intensity. Thus absolutely avoid the exist of hidden trouble as
weld-broken, crack etc. radiator, the heat-balance effect exceeds the
national standard requirements which at the same time avoid the
trouble of oil mismatching with the water.
Drive Axle:
Adopting strengthened drive axle, rear axle swing directly and easy to maintain with long working life.
Engine Cover:
Adopting semi-combination structure it’s pretty and easy to maintain for parts.
Transmission Shaft:
Front transmission shaft adopts separated middle support which reduces the swing range of the transmission shaft and extends the use-life of transmission shaft together with reliable torque-transfer.
Pipes:
The pipes layout tidily﹠glidingly for all hydraulic system and brake system which avoid the intervene﹠friction and reduce the malfunction rate of pipes
Cooling System:
Adopting the optimized design of cooling liquid of engine, hydraulic oil and torque-conversion oil. Enlarging the radiator area with smooth ventilation and good.
Instrument System:
Advanced instrument is pretty good. The qualified instruments the timely monitor to the whole machine while working.
Cab:
The rubber shock absorber equipment use between Cab and frame
which reduce vibration. All closed Cab reduces the noisy.
Equipping with top warm-fan or A/C and luxurious shock absorber
seat, the cab is open and bright with wide-vision and comfortable
operation environments.
Working Control System:
Adopting the newest-technological working control system, the machine is with light﹠agility control force which reduce the labor’s intensity.
Data
| Item | CL956 CL956-1 | CL956-2 | CL956-3 | CL956-4 |
| Engine | ||||
| TYPE | WD STEYR WD615.67G3-36 | DF CUMMINS 6CTA8 .3-C215 |
SD CAT C6121 | WD STEYR WD615.67G3-36 |
| Rated power | 162kw |
160kw | 162kw |
162kw |
| Rated speed | 2200r/min |
2200r/min |
2200r/min |
2200r/min |
Data |
||||
| Bucket capacity | 3.0m³ |
3.0m3 |
3.0m³ |
4.0m³ |
| Rated load | 5000kg |
5000kg |
5000kg |
5000kg |
| Raising time (Full load) | ≤6.5s |
≤6.5s |
≤6.5s |
≤6.5s |
| Dropping time (Empty) | ≤3.5s |
≤3.5s |
≤3.5s |
≤3.5s |
| The sum of three items | ≤11.5s |
≤11.5s |
≤11.5s |
≤11.5s |
| Max. dumping height | 3120 |
3120 |
3120 |
3500 |
| Dumping reach | 1120 |
1120 |
1120 |
1220 |
| Max. breakout force | ≥160kN |
≥160kN |
≥160kN |
≥160kN |
| Max. tractive force | ≥150kN |
≥150kN |
≥150kN |
≥150kN |
≥110kN |
≥110kN |
≥110kN |
≥110kN |
|
Traveling speed(km/h) |
||||
| Forward Ⅰ | 0--12 |
0--7 |
0--7 |
0--12 |
| ForwardⅡ |
0--36 |
0--12 |
0--12 |
0--36 |
| ForwardⅢ |
0--23 |
0--23 |
||
| ForwardⅣ |
0--38 |
0--38 |
||
| ReverseⅠ |
0--16 |
0--7 |
0--7 |
0--16 |
| ReverseⅡ |
0--12 |
0--12 |
||
| ReverseⅢ |
0--23 |
0--23 |
||
| Min.turning radius |
6044mm |
6044mm |
6044mm |
6044mm |
| Outside of bucket |
6707mm |
6707mm |
6707mm |
7006mm |
| Max.climbing gradient |
30° |
30° |
30° |
30° |
|
(mm)
Dimensions |
||||
| Overall length |
8020 |
8020 |
8020 |
8690 |
| Overall width |
2800 |
2800 |
2800 |
2800 |
| Overall height |
3382 |
3382 |
3382 |
3382 |
| Overall width |
2988 |
2988 |
2988 |
2988 |
| Wheel base(Front/Rear) |
3200(1600/1600) |
3200(1600/1600) |
3200(1600/1600) |
3200(1600/1600) |
| Wheel track |
2248 |
2248 |
2248 |
2248 |
| Operating weight |
16800kg |
16800kg |
16800kg |
17000kg |
| Axle No. |
2 |
2 |
2 |
2 |
HYDRAULIC EXCAVATOR
SC70-7 Hydraulic Excavator
| | Engine |
| Model: | (Cummins)B3.3 |
| (Yanmar)4TNV98 | |
| Type: | Water-cooled, 4-cycle, Direct |
| injection and Turbocharged | |
| Number of cylinders bore ×stroke)(mm) | 4--95×115, 4--98×110 |
| Piston displacement (L) | 3.3 |
| Rating power (Kw/rpm) | 45/2200,46.3/2200 |
| Alternato (A) | 12V,60 12V,40 |
| Battery (v,Ah) | 12V,120 |
| Undercarriage | |
| Number of carrier rollers | 1each side |
| Number of track rollers | 5 each side |
| Number of shoes | 38 each side |
| Hydraulics | |
| Hydraulics Pump | |
| Type | Variable displacement piston type |
| Maximum flow (L/min) | 154 |
| Setting pressure (Mpa) (Kg/c㎡) | 25(255) |
| Valve | |
| Control | Full Hydraulic Joystick |
| Travel Motor | Brake |
| Valve ×2 | |
| Swing Motor | Safe |
| Valve×1 | |
| Hydraulic cylinders | |
| Boom | ￠115×￠65 |
| Arm | ￠100×￠60 |
| Bucket | ￠90×￠55 |
| Blade | ￠120×￠70 |
| Attachment | |
| 0.28m3 Bucket | 0.20 m3 Small Bucket |
| Working Range | |
| Operating weight (kg) | 6800 |
| O (Max. digging height) (mm) | 7165 |
| P (Max. dumping height) (mm) | 5068 |
| Q (Max. digging depth) (mm) | 4038 |
| R (Max. vertical wall digging depth) (mm) | 3505 |
| T (Max. digging reach) (mm) | 6333 |
| U (Max. digging reach at ground level) (mm) | 6182 |
| Bucket digging force at power Max (kN) | 52.7 |
| Swing speed (rpm) | 9.touko |
| Travel speed (km/H) | L:2.7 H:5.1 |
| Average Group Press (kPa) | 34.76 |
| Dimensions | |
| A (Overall length) (mm) | 6103 |
| C (Overall height(to top of boom)) (mm) | 2515 |
| D (Width of crawler) (mm) | 2198 |
| E (Overall height(to top of cab)) (mm) | 2630 |
| G (Min ground clearance) (mm) | 381.5 |
| R (Tail swing radius) (mm) | 1755 |
| S (Min swing radius) (mm) | 1792 |
| I (Length of track on ground) (mm) | 2130 |
| J (Track length) | 2757 |
| K (Track gauge) (mm) | 1700 |
| L (Width of crawler) (mm) | 2150 |
| M (Width of track shoe) (mm) | 450 |
| N (Height of shovel) (mm) | 445 |
| V (Width of shovel) (mm) | 2258 |
SC130-7Hydraulic Excavator
Engine
| Model: | 4BTA3.9 (Cummins 4BTA3.9) |
| Type: | Water-cooled, 4-cycle, Direct injection and Turbocharged |
| Number of cylinders bore stroke) x (mm) | 4-102×120 |
| Piston displacement (L) | 3.9 |
| Rating power (Kw/rpm) | 82/2200 |
| Alternato (A) | 35 |
| Battery (v,Ah) | 12,120×2 |
| Undercarriage | |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 7 each side |
| Number of shoes | 42 each side |
| Hydraulics | |
| | Hydraulics Pump |
| Type | Variable displacement piston type |
| Maximum flow (L/min) | 128×2 |
| Setting pressure (Mpa) (Kg/c㎡) | 34.3(350) |
| Valve | |
| Control | Full Hydraulic Joystick |
| Travel Motor | Brake Valve |
| Swing Motor | Safe Valve |
| Hydraulic cylinders | |
| Number of cylinders--Bore×Rod diameter | |
| Boom | ￠105×￠70 |
| Arm | ￠115×￠80 |
| Bucket | ￠95×￠65 |
| Attachment | |
| 0.53 m3 Bucket | 0.45 m3 Rock Bucket |
| Working Range | |
| Operating weight (kg) | 13000 |
| O (Max. digging height) (mm) | 8630 |
| P (Max. dumping height) (mm) | 6180 |
| Q (Max. digging depth) (mm) | 5501 |
| R (Max. vertical wall digging depth) (mm) | 4940 |
| T (Max. digging reach) (mm) | 8309 |
| U (Max. digging reach at ground level) (mm) | 8180 |
| W (Max. height at Min. swing radius) (mm) | 6433 |
| Bucket digging force at power Max (kN) | 80 |
| Swing speed (rpm) | 12.6 |
| Travel speed (km/H) | L:3.1 H:5.3 |
| Average Group Press (kPa) | 38 |
| Dimensions | |
| A (Overall length) (mm) | 7576 |
| B (Width of crawler) (mm) | 2490 |
| C (Overall height(to top of boom)) (mm) | 2780 |
| D (Overall height (to top of cab)) (mm) | 2813 |
| E (Ground clearance counter weight) (mm) | 870 |
| F (Min ground clearance) (mm) | 433 |
| G (Tail swing radius) (mm) | 2015 |
| H (Length of track on ground) (mm) | 2750 |
| J (Track length) | 3486 |
| K (Track gauge) (mm) | 1960 |
| L (Width of crawler) (mm) | 2460 |
| M (Width of track shoe) (mm) | 500 |
| V (Min swing radius) (mm) | 2495 |
| X (Distance between swing center) (mm) | 2015 |
SC210-7Hydraulic Excavator
| | Engine |
| Model: | 6BG1TQB—05（Isuzu 6BG1TQB—05） |
| Type: | Water-cooled,4-cycle, Direct injection and Turbocharged |
| Number of cylinders bore x stroke) (mm) | 6--105×125 |
| Piston displacement (L) | 6.494 |
| Rating power (Kw/rpm) | 117/2150 |
| Alternato (A) | 24V,40 |
| Battery (v,Ah) | 12,120×2 |
| Undercarriage | |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 7 each side |
| Number of shoes | 45 each side |
| Hydraulics | |
| Hydraulics Pump | |
| Type | Variable displacement piston type |
| Maximum flow (L/min) | 214×2 |
| Setting pressure (Mpa) (Kg/c㎡) | 34.3(350) |
| Valve | |
| Control | Full Hydraulic Joystick |
| Travel Motor | Brake Valve ×2 |
| Swing Motor | Safe Valve ×1 |
| Hydraulic cylinders | |
| Number of cylinders--Bore×Rod diameter | |
| Boom | ￠120×￠85 |
| Arm | ￠135×￠95 |
| Bucket | ￠115×￠80 |
| Attachment | |
| 0.8m3 Bucket | 0.65 m3 Rock Bucket |
| Working Range | |
| Operating weight (kg) | 21000 |
| O (Max. digging height) (mm) | 9223 |
| P (Max. dumping height) (mm) | 6505 |
| Q (Max. digging depth) (mm) | 6570 |
| R (Max. vertical wall digging depth) (mm) | 5980 |
| T (Max. digging reach) (mm) | 9867 |
| U (Max. digging reach at ground level) (mm) | 9680 |
| Bucket digging force at power | 138.3 |
| Max) (kN) | |
| Swing speed (rpm) | 12 |
| Travel speed (km/H) | L：3.1 H：5.5 |
| Average Group Press (kPa) | 44.9 |
| Dimensions | |
| A (Overall length) (mm) | 9390 |
| B (Width of crawler) (mm) | 2780 |
| C (Overall height (to top of boom)) (mm) | 2985 |
| D (Overall height (to top of cab)) (mm) | 2940 |
| E (Ground clearance counter weight) (mm) | 1064 |
| F (Min ground clearance) (mm) | 468 |
| G (Tail swing radius) (mm) | 2720 |
| H (Length of track on ground) (mm) | 3260 |
| J (Track length) | 4070 |
| K (Track gauge) (mm) | 2180 |
| L (Width of crawler) (mm) | 2780 |
| M (Width of track shoe) (mm) | 600 |
| V (Min swing radius) (mm) | 3630 |
| W （Max. height at Min. swing radius）(mm) | 7616 |
SC220SE-7 Hydraulic Excavator
| Engine | |
| Model: | 6BTA5.9(Cummins6BTA5.9) |
| Type: | Water-cooled,4-cycle, Direct injection and Turbocharged |
| Number of cylinders bore × stroke(mm) | 6-102×120 |
| Piston displacement (L) | 5.88 |
| Rating power (Kw/rpm) | 125/2100 |
| Alternato(A) | 35 |
| Battery(v,Ah) | 24,120×2 |
| Undercarriage | |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 8 each side |
| Number of shoes | 47 each side |
| Hydraulics | |
| HydraulicsPump | |
| Type | Variable displacement piston type |
| Maximum flow (L/min) | 226×2 |
| Setting pressure)(Mpa)(Kg/c㎡) | 34.3（350） |
| Valve | |
| Control | Full Hydraulic Joystick |
| Travel Motor | Brake Valve |
| Swing Motor | Safe Valve |
| Hydraulic cylinders | |
| Number of cylinders--Bore×Rod diameter | |
| Boom | ￠130×￠90 |
| Arm | ￠140×￠100 |
| Bucket | ￠130×￠90 |
| Attachment | |
| 1.7 m3 Light load bucket | |
| 1.0 m3 Bucket | |
| 0.8 m3 Rock Bucket | |
| Hydraulic Hummer | |
| Staff Diameter≤∮135mm | |
| WorkingRange | |
| Q (Max.digging depth)(mm) | 6400 |
| R (Max.vertical wall digging depth)(mm) | 5296 |
| T (Max.digging reach)(mm) | 9656 |
| U (Max. digging reach at ground level) (mm) | 9466 |
| O (Max. digging height) (mm) | 8956 |
| P (Max. dumping height) (mm) | 6125 |
| Bucket digging force at power Max) (kN) | 159.7 |
| (kN) | 174 |
| Swing speed (rpm) | 11 |
| Travel speed (km/H) | L:3.1 H:5.5 |
| 35° | |
| Average Group Press (kPa) | 52.16 |
| Dimensions | |
| A (Overall length) (mm) | 9797 |
| B (Width of crawler) (mm) | 2980 |
| C (Overall height(to top of boom)) (mm) | 3230 |
| D (Overall height (to top of cab)) (mm) | 2939.4 |
| E (Ground clearance counter weight) (mm) | 1064.6 |
| F (Min ground clearance) (mm) | 467 |
| G (Tail swing radius) (mm) | 2838 |
| H (Length of track on ground) (mm) | 3445 |
| J (Track length) | 4256 |
| K (Track gauge) (mm) | 2380 |
| L (Width of crawler) (mm) | 2980 |
| M (Width of track shoe) (mm) | 600 |
| V (Min swing radius) (mm) | 4037 |
| X (Distance between swing center) (mm) | 7802 |
| Y | 26 |
SC220-7 Hydraulic Excavator |
|
| Engine | |
| Model: | 6BTA5.9 (Cummins 6BTA5.9) |
| 6BG1TQB—05（Isuzu 6BG1TQB—05） | |
| Type: | Water-cooled,4-cycle, Direct injection and Turbocharged |
| Number of cylinders bore × stroke (mm) | 6-102×120, 6--105×125 |
| Piston displacement (L) | 5.88,6.494 |
| Rating power (Kw/rpm) | 125/2100,117/2150 |
| Alternato (A) | 35,40 |
| Battery (v,Ah) | 24,120×2 |
| | Undercarriage |
| Number of carrier rollers | 2 each side |
| Number of track rollers | 8 each side |
| Number of shoes | 47each side |
| Hydraulics | |
| Hydraulics Pump | |
| Type | Variable displacement piston type |
| Maximum flow (L/min) | 226×2 |
| Setting pressure (Mpa) (Kg/ c㎡) | 34.3(350) |
| Valve | |
| Control | Full Hydraulic Joystick |
| Travel Motor | Brake Valve |
| Swing Motor | Safe Valve |
| Hydraulic cylinders | |
| Number of cylinders--Bore×Rod diameter | |
| Boom | ￠130×￠90 |
| Arm | ￠140×￠100 |
| Bucket | ￠130×￠90 |
| Attachment | |
| 1.0 m3 Bucket | |
| 0.8 m3 Rock Bucket | |
| 15M, 18M Long Boom | |
| 0.45 m3 Bucket | |
| 0.29 m3 Bucket | |
| Working Range | |
| Operating weight (kg) | 22180 |
| O (Max. digging height) (mm) | 9255 |
| P (Max. dumping height) (mm) | 6383 |
| Q (Max. digging depth) (mm) | 6930 |
| R (Max. vertical wall digging | 5915 |
| T (Max. digging reach) (mm) | 10173 |
| U (Max. digging reach at ground level) (mm) | 9993 |
| W (Max. height at Min. swing radius）(mm) | 7717 |
| Bucket digging force at power Max) (kN) | 159.7 |
| Swing speed (rpm) | 11.7 |
| Travel speed (km/h) | L:3.1 H:5.5 |
| Average Group Press (kPa) | 52.16 |
| Dimensions | |
| A (Overall length) (mm) | 9739 |
| B (Width of crawler) (mm) | 2980 |
| C (Overall height(to top of boom)) (mm) | 3135 |
| D (Overall height(to top of cab)) (mm) | 2 939 |
| E (Ground clearance counter weight) (mm) | 1064 |
| F (Min ground clearance) (mm) | 442 |
| G (Tail swing radius) (mm) | 2838 |
| H (Length of track on ground) (mm) | 3445 |
| J (Track length) | 4256 |
| K (Track gauge) (mm) | 2380 |
| L (Width of crawler) (mm) | 2980 |
| M (Width of track shoe) (mm) | 600 |
| V (Min swing radius) (mm) | 3974 |
| X (Distance between swing center) (mm) | 2809 |